Your Best SH6964B Supplier in China

SH6964B Distributor - Your Best TI SH6964B Supplier in China

Rantle is the most reliable and trusted Texas Instruments(TI) SH6964B distributor in China. We have full capability to distribute quality and excellent SH6964Band any electric devices because we have been 10 years in the distributing industry.

SH6964B

Any SH6964B, We are Your Source!

SH6964B

Rantle is a great choice as a distributor of Texas Instruments(TI) SH6964B. We are the best source regarding electronic components. The T SH6964B is essential for building signal processing circuits, control circuits, and instrumentation.

This device is typical Operation voltage – fOSC = 400kHz – 4MHz, VDD = 2.0V – 5.5V – fOSC = 4MHz – 8MHz, VDD = 4.5V – 5.5V. SH6964B has a minimum operating temperature of -40 °C and a maximum of 125 °C. It has 4 channels per chip. This device uses dual power supplies.

Tell Us Your Part Number To Get Instant Quote

Add 1+ Parts & Quantity

Professional SH6964B Distributor - Rantle East Electronic

Texas Instruments(TI) ic components SH6964B is a single-chip micro-controller integrated with SRAM, ROM, Timer, and I/O port, with a built-in 2MHz/4MHz/6MHz RC oscillator.

Texas parts SH6964B perform arithmetic and logic operations. TI SH6964B is a 4-bit register holding the results of the arithmetic logic unit.

SH6964B supplier

In conjunction with ALU, data is transferred between the accumulator and system register, or data memory can be performed.

It contains general-purpose data memory and system register. Because of its static nature, the RAM can keep data after the CPU enters STOP or HALT mode.

Therefore the external source must follow certain constraints. The system clock samples it in frame cycle instruction.

During SH6964B CPU interrupt service, the user can enable any interrupt to enable flag before returning from the interrupt.

SH6964B distributor

The servicing sequence diagram shows the next interrupt and the next nesting interrupt occurrences. If the interrupt request is ready and the instruction of execution N is IE enable, then the interrupt will start immediately after the next two instructions executed

When an interrupt occurs, the PC and CY flag will be saved into stack memory and jump to the interrupt service vector address.

RANTLE is an individualistic TI chips SH6964B distributor. Using excellent processing mechanics, we extend a notably efficient and trustworthy SH6964B device.

SH6964B on PCB

Ideally use a wide type of industrial and automated applications. We make sure to distribute the Texas Instruments(TI) electronic components and parts SH6964B with good function.

You can get your desired electric components at Rantle, inquire about us now!

Scroll to Top