LF398M Distributor - Your Best LF398MX/NOPB Supplier in China
Rantle is a professional and a top LF398M distributor and supplier in China. Our LF398M are made by top-grade and superior materials. At Rantle you can guarantee the best and outstanding LF398M. These are excellently use in various application.
Any LF398M, We are Your Source!
Texas Instruments(TI) LF398M devices are rated for a typical supply voltage of ±15 V. To achieve noise immunity as appropriate to the application, it is important to use good printed-circuit-board layout practices for power supply rails and planes.
As well as using bypass capacitors connected between the power supply pins and ground. All bypass capacitors must be rated to handle the supply voltage and be decoupled to the ground. The large capacitor can be shared by more than one device if necessary.
Get LF398M Price and Buy LF398MX/NOPB from RANTLE. Contact us for your NSC/TI IC components LF398M requirement Now.
Tell Us Your Part Number To Get Instant Quote
Professional LF398M Distributor - Rantle East Electronic
Texas Instruments(TI) LF398M devices are monolithic sample-and-hold circuits that use BI-FET technology to obtain ultrahigh DC accuracy with fast acquisition of signal and low droop rate.
A bipolar input stage is used to achieve low offset voltage and wide bandwidth. Input offset adjustment is accomplished with a single pin and does not degrade input offset drift.
The wide bandwidth allows the LF398M to be included inside the feedback loop of 1-MHz operational amplifiers without having stability problems.
The LF398MX/NOPB OUTPUT tracks the INPUT signal by charging and discharging the hold capacitor. The OUTPUT can be held at any given time by pulling the LOGIC input low relative to the LOGIC REFERENCE voltage and resume sampling when LOGIC returns high.
Additionally, the OFFSET pin can be used to zero the offset voltage present at the INPUT. The LF398M devices have a sample mode and hold mode controlled by the LOGIC voltage relative to the LOGIC REFERENCE voltage.
The device is in sample mode when the LOGIC input is pulled high relative to the LOGIC REFERENCE voltage and in hold mode when the LOGIC input is pulled low relative to the LOGIC REFERENCE.
Smaller values of hold capacitance will allow the output to track faster signals. In hold mode, the input signal is disconnected from the signal path and the output retains the value on the hold capacitor.
Rantle is distributing high-quality, low-cost LF398M, and LF398MX/NOPBproducts and first-class service to customers. We sincerely hope to establish business relationships with costumer from different places in the world on the basis of quality, mutuality benefit.
If you want more about our products and our service do not hesitate to contact us!
To learn more about the Texas Instruments(TI) IC components, please click the LF398M datasheet.
