Your Best SPX1117M3-L-3-3 Distributor – Your Best SPX1117M3-L-3-3 Supplier in China
Rantel is a professional EXAR/SIPEX/MaxLinear SPX1117M3-L-3-3 distributor and supplier located in China. We own the widest selection of electrical components. We can truly support any part number of your orders. We, Rantle strive to meet your special requirements.
Looking for a high-quality SPX1117M3-L-3-3? We can help you source and locate.
If you are looking for a reliable and trusted distributor Rantle is your ultimate solution. We are a reputable and trusted distributor of different quality electronic components.
EXAR/SIPEX/MaxLinear SPX1117M3-L-3-3 is a low-power positive-voltage regulator designed to satisfy moderate power requirements with a cost-effective, small footprint solution.
The SPX1117M3-L-3-3/TR is offered in a 3-pin SOT-223 surface-mount packages. An output capacitor of 10µF provides unconditional stability while a smaller 2.2µF capacitor is sufficient for most applications.
Tell Us Your Part Number To Get Instant Quote
Your Reliable Distributor of SPX1117M3-L-3-3– RANTLE East Electronics
Rantle can supply SPX1117M3-L-3-3 with the highest quality and best performance. We always make sure the quality of every SPX1117M3-L-3-3 standards.
Rantle SPX1117M3-L-3-3 is a low power positive-voltage regulator designed to satisfy moderate power requirements with a cost effective, small footprint solution. This device is an excellent choice for use in battery-powered applications and portable computers.
This SPX1117M3-L-3-3 features very low quiescent current and a low dropout voltage of 1.1V at a full load. As output current decreases, quiescent current flows into the load, increasing efficiency. SPX1117 is available in adjustable or fixed 1.5V, 1.8V, 2.5V, 3.3V and 5V output voltages.
The SPX1117M3-L-3-3 package is designed to be compatible with infrared reflow or vapor phase reflow soldering techniques. During soldering, the non-active or mildly active fluxes may be used. The SPX1117 die is attached to the heatsink lead which exits opposite the input, output, and ground pins.
The thermal resistance of SPX1117M3-L-3-3/TR is 15°C/W from junction to tab and 31°C/W from tab to ambient for a total of 46 °C/W from junction to ambient (Table 1). The SPX1117M3-L-3-3 features the internal thermal limiting to protect the device during overload conditions.
Special care needs to be taken during continuous load conditions such that the maximum junction temperature does not exceed 125 °C. Thermal protection is activated at >155°C and deactivated at 140^C.
The thermal interaction from other components in the application can affect the thermal resistance of the SPX1117M3-L-3-3. The actual thermal resistance can be determined with experimentation.
Our SPX1117M3-L-3-3 is not intended for operations requiring start-up into a pre-biased load. Proper discharge of the output voltage is recommended prior to turning on the device through the application of the input voltage.
Rantle is glad to distribute all your orders. We have many SPX1117M3-L-3-3 stock available for your urgent orders. We can able to distribute your orders timely.
Contact us to get more information!
To learn more about the EXAR/SIPEX/MaxLinear components PX1117M3-L-3-3/TR, please click the PX1117 datasheet.
