AT45DB321D-SU Distributor - Your Best AT45DB321D-SU Supplier in China
Rantle is well-known that specializing in the electronic components distribution business. We are the largest ATMEL AT45DB321D-SU distributor. ATMEL has complete equipment and technique that we using in producing electrical components.
Any NT68676UFG, We are Your Source!
Rantle has a wide selection and the great source, and we reserve a large number of electronic components including AT45DB321D-SU.
ATMEL AT45DB321D-SU memory array is divided into three levels of granularity comprising sectors, blocks, and pages.
All program operations to the DataFlash device occur on a page-by-page basis. The erase operations can be performed at the chip, sector, block, or page level.
Tell Us Your Part Number To Get Instant Quote
Professional AT45DB321D-SU Distributor - Rantle East Electronic
The ATMEL ic components AT45DB321D-SU is a 2.5V or 2.7V, serial interface, sequential access flash memory ideally suited for a wide variety of digital voice-, image-, program code-, and data-storage applications.
The ATMEL AT45DB321D-SU supports the RapidS serial interface for applications requiring very high speed operations. The RapidS serial interface is SPI compatible for frequencies up to 66MHz.
The 34,603,008-bits of memory are organized as 8,192 pages of 512 bytes or 528 bytes each. In addition to the main memory, the AT45DB321D-SU also contains two SRAM buffers of 512/528 bytes each.
These buffers allow the receiving of data while a page in the main memory is being reprogrammed, as well as the writing of a continuous data stream.
The simple sequential access dramatically reduces active pin count, facilitates hardware layout, increases system reliability, minimizes switching noise, and reduces package size.
The device is optimized for use in many commercial and industrial applications where high density, low pin count, low voltage and low power are essential.
To allow for simple, in-system programmability, the AT45DB321D-SU does not require high input voltages for programming.
The device operates from a single power supply, 2.7V to 3.6V, for both the program and read operations.
The AT45DB321D-SU is enabled through the chip select pin and accessed via a three-wire interface consisting of the serial input serial output and serial clock (SCK) lines.
Rantle distributes high-quality AT45DB321D-SU at friendly prices. Our electrical components are absolutely suited to your budget.
With excellent service, Rantle will be your most trustworthy one-stop source any electric components including AT45DB321D-SU.
You can trust Rantle as your distributor of ATMEL ic chips AT45DB321D-SU because we are in this distributing industry for many years and we are an expert and knowledgeable one.
Contact us for more information!
To learn more about the ATMEL electronic components and parts AT45DB321D-SU, please click the AT45DB321D-SU datasheet.
